Lente Skrevet Oktober 22, 2010 Skrevet Oktober 22, 2010 Følger med laptop med prog.vare på.. 3 stk dobble coiler 2 givere manual kontakt Pris 5000 ? evt bud Tlf : 99774401 Lettest og få tak i der gitt P8 PROEngine And Vehicle Management System P8PRO has been developed from the outset as a fully featured and highly capable engine and vehicle management system. The high performance ECU can expertly controlling engines of up to 12 cylinders with almost any configuration. P8 PRO packs a host of advanced features required by modern multi-cylinder applications. P8 PRO underwent an extensive on-track trial period of over 1 year, following which the production version of the P8 PRO was released. Many event wins and track records have already been recorded by vehicles controlled by this system. P8 PRO ECU Features Without doubt the worlds most user friendly mapping software - FREE! Eight individually controllable coil drivers for unequal firing or different cylinder advance. Eight injector drivers, with individual adjustments, for sequential injection up to eight cylinders or control of up to 16 staged twin injectors. Amplified Coils Support NEW Full 3 or 4 wheel traction control with switchable, on dash, on/off and wet/dry settings. Launch control with numerous options. Turn off closed loop above TPS & RPM NEW Full turbo anti lag facilities, switchable on dash. Logging switch able on dash NEW Voltage in warning limits during Mapping NEW Manifold Pressure as main load NEW Improved idle speed control NEW Nine auxiliary outputs for various functions. Improved, more flexible data logging capabilities NEW Compensation for air temp / water temp / MAP or barometric pressure on fuel and ignition. Closed loop Lambda control. Full turbo pressure control variable by RPM with overboost protection. Steering wheel button controlled start line RPM limit. Full power shift cut. Temperature dependant idle speed control via PWM valve. Dedicated shift light output. Serial output of data for dashboard NEW Dedicated Tacho output. Two stage main RPM limiter. Dedicated fuel pump control. Full start-up fuelling map. Throttle transient enrichment map. Self test facilities for ignition and injection. Diagnostics and peak recording. Real time mapping, no EPROM's required. Selectable 20 X 14 lambda target map In-vehicle fuel map building Can use 5 volt linear lambda sensor with external electronics Software programmable for most crank wheels, (Honda Blackbird, Rover, 36 - 1, 60-2 etc). All main 3D maps (20 x 14) have user programmable break points. Max. RPM up to 16,000. Flexible PWM outputs linked to any input useable for any of the following; * Water injection (multistage) * Speed related power reduction (Drag bikes) * NOS control with fuel enrichment and ignition retard (multistage) * Fuel Mixture control for endurance racing * Twin Fuel pump control * Anything else requiring mixture and ignition control linked to an input and an output. General Billet machined enclosure. 32Mhz Processor. 55 pin, sealed, reliable, easy to use connector system. Free upgrades for one year. Two year warranty.
Anbefalte innlegg
Opprett en konto eller logg inn for å kommentere
Du må være et medlem for å kunne skrive en kommentar
Opprett konto
Det er enkelt å melde seg inn for å starte en ny konto!
Start en kontoLogg inn
Har du allerede en konto? Logg inn her.
Logg inn nå