Gå til innhold
View in the app

A better way to browse. Learn more.

Bimmers.no | BMW Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
🔧 Vi fornyer Bimmers.no! Oppgraderinger gjennom november kan medføre periodevis ustabilitet. Takk for tålmodigheten!

Rheingold obd.ini

Featured Replies

Skrevet

Jeg har problemer med å få Rheingold til å få kontakt med bilen. Men jeg mangler obd.ini filen i EDIABAS katalogen. Er det en installasjonsfil jeg må kjøre eller er programmet mangelfullt? Noen som har teksten som skal være i denne filen?

Skrevet

Her:

Bare vær obs på at rheinhold må ligge sammen med de andre bmw mappene som edibas, ec-apps, NCSEXPER og NFS-backup. Mine ligger alle under C:\. Og Rheingold er da C:\Rheingold

Spoiler

;#################
;# EDIABAS 7.3.0 #
;#################

;=============================================================================
[Configuration]
;=============================================================================
Interface        =STD:OBD
Simulation       = 0

EcuPath          =C:\EDIABAS\ECU
SimulationPath   =C:\EDIABAS\SIM
TracePath        =C:\EDIABAS\TRACE
TraceSize        = 1024

ApiTrace         =0
IfhTrace         =0
; IfhnTrace        = 0

; SystemTraceSys   = 0
; SystemTraceBip   = 0
; SystemTraceIfh   = 0
; SystemTraceNet   = 0

; BipDebugLevel    = 0
; BipErrorLevel    = 0

UbattHandling    = 0
IgnitionHandling = 0
ClampHandling    = 0

RetryComm        = 1
SystemResults    = 1
TaskPriority     = 0

; CodeMapping      = C:\EC-Apps\EDIABAS\BIN\ansi2oem.tab
; LoadWin32        = 0

NetworkProtocol  = TCP

; --- neu ab EDIABAS 7.2.0 ---------------------------------------------------
ShowIcon         = 1
LogLevel         = 0
TraceBuffering   = 0
TraceHistory     = 0
TraceSync        = 1
SystemTraceSys=0
SystemTraceBip=0
SystemTraceIfh=0
SystemTraceNet=0
BipDebugLevel=0
BipErrorLevel=0
; TraceWriter      = <FilePathName>

;=============================================================================
[TCP]
;=============================================================================
RemoteHost             = 192.168.68.4
Port                   = 6801
TimeoutConnect         = 2000
TimeoutReceive         = 2000
TimeoutFunction        = 10000
; TimeResponsePending    = 5000
; DisconnectOnApiEnd     = 1
; InitCmd0               = FE,04,00,03,01
; InitCmd1               = FD,05,00,03,01

;=============================================================================
[XEthernet]
;=============================================================================
RemoteHost       = Autodetect
HeaderFormat     = 0
TesterAddress    = F4,F5
ControlPort      = 6811
DiagnosticPort   = 6801
TimeoutConnect   = 20000

;=============================================================================
[IfhProxy]
;=============================================================================
Port             = 6700


;#############################################################################
;#############################################################################
;##   ausführliche Variante von EDIABAS.ini  (mit Kurz-Info und Default)    ##
;#############################################################################
;#############################################################################

;=============================================================================
; EDIABAS Basic Configuration
; [Configuration]
;=============================================================================

;### new Configuration elements since EDIABAS 7.2 ############################

;-----------------------------------------------------------------------------
; ShowIcon
;       Description :   Enable/Disable EDIABAS-Icon in System-Tray
;       Value       :   0  = EDIABAS-Icon disabled
;                       1  = EDIABAS-Icon enabled
;       Default     =   1
; ShowIcon         = 1

;-----------------------------------------------------------------------------
; LogLevel
;       Description :   Logging of fatal faults in EDIABAS.log
;       Value       :   0  = Logging disabled
;                       1  = Logging enabled
;       Default     =   0
; LogLevel         = 0

;-----------------------------------------------------------------------------
; TraceBuffering
;       Description :   Manner of Opening/Closing of Trace-Files
;       Value       :   0  = Opening/Closing after every dump
;                       1  = Trace-Files stay open
;       Default     =   0
; TraceBuffering   = 0

;-----------------------------------------------------------------------------
; TraceHistory
;       Description :   Number of History-Trace-Files
;       Value       :   0 .. 999
;       Default     =   0
; TraceHistory     = 0

;-----------------------------------------------------------------------------
; TraceSync
;       Description :   Synchronisation of Trace files
;       Value       :   0  = Synchronisation disabled
;                       1  = Synchronisation enabled
;       Default     =   1
; TraceSync        = 1

;-----------------------------------------------------------------------------
; TraceWriter
;       Description :   FilePathName of a private TraceWriter
;       Default     =   .  (Default-TraceWriter "TWFile32.dll")
; TraceWriter      = .


;### older Configuration elements till EDIABAS 7.1 ###########################

;-----------------------------------------------------------------------------
; Simulation
;       Description :   Enable/Disable ECU simulation
;       Value       :   0  = Simulation disabled
;                       1  = Simulation enabled
;       Default     =   0
; Simulation       = 0

;-----------------------------------------------------------------------------
; EcuPath
;       Description :   ECU file path
;       Default     =   .
; EcuPath          = C:\EC-Apps\EDIABAS\ECU

;-----------------------------------------------------------------------------
; SimulationPath
;       Description :   Simulation file path
;       Default     =   .
; SimulationPath   = C:\EC-Apps\EDIABAS\SIM

;-----------------------------------------------------------------------------
; TracePath
;       Description :   Trace file path
;       Default     =   .
; TracePath        = C:\EC-Apps\EDIABAS\TRACE

;-----------------------------------------------------------------------------
; TraceSize
;       Description :   Maximum size of each trace file [KB]
;       Value       :   0 .. 32767
;       Default     =   1024
; TraceSize        = 1024

;-----------------------------------------------------------------------------
; ApiTrace
;       Description :   Enable/Disable API/User trace
;       Value       :   0  = Trace disabled
;                       1  = User trace
;                       2  = User trace + time stamp
;                       3  = User trace + time stamp + process id (Win32)
;                       4  = Function trace
;                       5  = Function trace + time stamp
;                       6  = Function trace + time stamp + timing
;                       7  = Function trace + time stamp + timing + process id (Win32)
;                       8  = Debug trace
;       Default     =   0
; ApiTrace         = 0

;-----------------------------------------------------------------------------
; IfhTrace
;       Description :   Enable/Disable IFH trace
;       Value       :   0  = Trace disabled
;                       1  = User trace
;                       2  = User trace + interface
;                       3  = User trace + interface + time stamp
;       Default     =   0
; IfhTrace         = 0

;-----------------------------------------------------------------------------
; IfhnTrace
;       Description :   Enable/Disable IFH network trace (with XREMOTE)
;       Value       :   0  = Trace disabled
;                       1  = User trace
;                       2  = User trace + interface
;                       3  = User trace + interface + time stamp
;       Default     =   0
; IfhnTrace        = 0

;-----------------------------------------------------------------------------
; SystemTraceSys
;       Description :   Enable/Disable system trace (runtime system)
;       Value       :   0  = Trace disabled
;                       Trace levels 1 .. 7
;       Default     =   0
; SystemTraceSys   = 0

;-----------------------------------------------------------------------------
; SystemTraceBip
;       Description :   Enable/Disable BIP trace (runtime system)
;       Value       :   0  = Trace disabled
;                       Trace levels 1 .. 7
;       Default     =   0
; SystemTraceBip   = 0

;-----------------------------------------------------------------------------
; SystemTraceIfh
;       Description :   Enable/Disable IFH system trace
;       Value       :   0  = Trace disabled
;                       Trace levels 1 .. 7
;       Default     =   0
; SystemTraceIfh   = 0

;-----------------------------------------------------------------------------
; SystemTraceNet
;       Description :   Enable/Disable network trace
;       Value       :   0  = Trace disabled
;                       Trace levels 1 .. 7
;       Default     =   0
; SystemTraceNet   = 0

;-----------------------------------------------------------------------------
; BipDebugLevel
;       Description :   BIP debug level of ECU files
;       Value       :   0 .. 32767
;       Default     =   0
; BipDebugLevel    = 0

;-----------------------------------------------------------------------------
; BipErrorLevel
;       Description :   BIP error level of ECU files
;       Value       :   0 .. 32767
;       Default     =   0
; BipErrorLevel    = 0

;-----------------------------------------------------------------------------
; UbattHandling
;       Description :   Ubatt ON/OFF handling
;       Value       :   0  = Ubatt ON/OFF: No EDIABAS error
;                       1  = Ubatt ON/OFF: EDIABAS error
;       Default     =   1
; UbattHandling    = 0

;-----------------------------------------------------------------------------
; IgnitionHandling
;       Description :   Ignition ON/OFF handling
;       Value       :   0  = Ignition ON/OFF: No EDIABAS error
;                       1  = Ignition ON/OFF: EDIABAS error
;       Default     =   1
; IgnitionHandling = 0

;-----------------------------------------------------------------------------
; ClampHandling
;       Description :   automatic check of clamps for Ubatt and Ignition
;       Value       :   0  = no automatic clamp check with send_and_receive
;                       1  = automatic clamp check with send_and_receive
;       Default     =   1
; ClampHandling    = 1

;-----------------------------------------------------------------------------
; RetryComm
;       Description :   Repeat failed communication automatically (1x)
;       Value       :   0  = Retry disabled
;                       1  = Retry enabled (1x)
;       Default     =   1
; RetryComm        = 1

;-----------------------------------------------------------------------------
; SystemResults
;       Description :   Enable/Disable system results (ubatt/ignition/jobstatus)
;       Value       :   0  = Disable system results
;                       1  = Enable system results
;       Default     =   1
; SystemResults    = 1

;-----------------------------------------------------------------------------
; TaskPriority
;       Description :   EDIABAS process/thread priority (only Win32/16)
;       Value       :   0  = Optimal EDIABAS performance = 8
;                       1  = Minimal EDIABAS performance
;                       ..
;                       10 = Maximal EDIABAS performance
;       Default     =   0
; TaskPriority     = 0

;-----------------------------------------------------------------------------
; CodeMapping
;       Description :   Character mapping file path
;       Default     =   .
; CodeMapping      = C:\EC-Apps\EDIABAS\BIN\ansi2oem.tab

;-----------------------------------------------------------------------------
; LoadWin32
;       Description :   Map EDIABAS Win16 calls to EDIABAS Win32
;       Value       :   0  = Win16/32 Mapping disabled (Win16-->Win16)
;                       1  = Win16/32 Mapping enabled (Win16-->Win32)
;       Default     =   0 for Windows 9x/Me
;       Default     =   1 for Windows NT4/2000/XP
; LoadWin32        = 0

;-----------------------------------------------------------------------------
; NetworkProtocol
;       Description :   Network protocol
;       Default     =
; NetworkProtocol  = TCP

;*****************************************************************************
; Interface
;       Description : Connected diagnosis interface
;       Default     = EDIC
; Interface        = STD:FUNK

; Additional information (in German) :
; Bitte beachten: Der HW-Treiber fuer das Interface muss installiert sein!

;.............................................................................
; Interface      = STD:FUNK
; Beschreibung   : Funk-Diagnose Interface MDA von Fa. Siemens
; Installation   : keine
; INI-Datei      : FUNK.INI
; Ansprechpartner: Manuel.Rothenberger@bmw.de
; WINDOWS-Freig. : WIN NT 4.0       : Ja
;                  WIN XP    32-Bit : Ja
;                  WIN 7     32-Bit : Ja

;.............................................................................
; Interface      = STD:OMITEC
; Beschreibung   : Nachfolger von OBD / enthält CAN-Anbindung / Anschluss an OBD-Dose
; Installation   : \EDIABAS\HARDWARE\OMITEC\AnleitungfuerOMITECInstallation.pdf
; INI-Datei      : siehe \EDIABAS\HARDWARE\OMITEC\Omitec_Doku.pdf
; Ansprechpartner: Reinhold.Drexel@bmw.de
; WINDOWS-Freig. : siehe \EDIABAS\HARDWARE\OMITEC\Omitec_Doku.pdf

;.............................................................................
; Interface      = STD:OBD
; Beschreibung   : Serieller Pegelwandler (Nachfolger von ADS / Anschluss an OBD-Dose)
; Installation   : \EDIABAS\HARDWARE\OBD\ODBSETUP (nur noetig fuer WIN NT4, WIN 2000, WIN XP)
; INI-Datei      : siehe \EDIABAS\HARDWARE\OBD\OBD_DOKU.pdf
; Ansprechpartner: Reinhold.Drexel@bmw.de
; WINDOWS-Freig. : WIN NT 4.0       : Ja
;                  WIN XP    32-Bit : Ja
;                  WIN 7     32-Bit : Ja

;.............................................................................
; Interface      = EDIC
; Beschreibung   : Anbindung über K-Line
; HW-Derivate    : PC-Card, PCMCIA , W-LAN (Interface von Fa. Softing)
; Installation   : \EDIABAS\HARDWARE\EDIC\SETUP.EXE
; INI-Datei      : EDICFW.INI, EDICHW.INI
; Ansprechpartner
; * EDIC-PC      : Gerd.Huber@bmw.de
; * PCMCIA       : Gerd.Huber@bmw.de
; * EDIC-NET     : (Richard.Kolbeck@bmw.de)
; WINDOWS-Freig. : WIN NT 4.0       : Ja
;                  WIN XP    32-Bit : Ja
;                  WIN 7     32-Bit : Ja

;.............................................................................
; Interface      = EDICC
; Beschreibung   : Anbindung über K-Line
; HW-Derivate    : PC-Card, PCMCIA , W-LAN (Interface von Fa. Softing)
; Installation   : \EDIABAS\HARDWARE\EDIC\SETUP.EXE
; INI-Datei      : EDICFW.INI, EDICHW.INI, XEDICC.INI
; Ansprechpartner
; * EDIC-PC      : Gerd.Huber@bmw.de
; * PCMCIA       : Gerd.Huber@bmw.de
; * EDIC-NET     : (Richard.Kolbeck@bmw.de)
; WINDOWS-Freig. : WIN NT 4.0       : Ja
;                  WIN XP    32-Bit : Ja
;                  WIN 7     32-Bit : Ja

;.............................................................................
; Interface      = STD:CAN
; Beschreibung   : PCMCIA CAN-Interface CanCardX von Fa. Vector
; Installation   : keine (ausser Installation der CAN-Karte)
; INI-Datei      : CAN32.INI
; Ansprechpartner: FLASH.SERVICE@BMW.DE (Hotline)
; WINDOWS-Freig. : !nicht mehr im Paket enthalten!

;.............................................................................
; Interface      = REMOTE
; Beschreibung   : Anbindung eines EDIABAS-Interfaces über TCP/IP (für Normalbetrieb)
; Installation   : Anpassung der Einträge in [TCP] auf beiden Seiten (ins.: RemoteHost, Port)
; INI-Datei      : keine
; Ansprechpartner
; * Remote-PC    : Gerd.Huber@bmw.de => Referenz@bmw.de
; * OP(P)S       : Michael.Rowedder@bmw.de
; * ICOM,Fertig. : ! keine Verwendung !
; * ICOM,Vertrieb: Robert.Schwinn@bmw.de
; WINDOWS-Freig. : WIN NT 4.0       : Ja
;                  WIN XP    32-Bit : Ja
;                  WIN 7     32-Bit : Ja

;.............................................................................
; Interface      = REMOTE:name
; Beschreibung   : Anbindung eines EDIABAS-Interfaces über TCP/IP (für Parallelbetrieb)
; Installation   : Anpassung der Einträge in [TCP] auf beiden Seiten (ins.: RemoteHost, Port)
; INI-Datei      : REMOTE.INI (insbesondere für Parallelbetrieb notwendig)
;                  In REMOTE.INI stehen unter [name] spezif. Einstellungen(z.B.: RemoteHost, Port).
; Ansprechpartner
; * Remote-PC    : ! momentan keine Verwendung !
; * OP(P)S       : Michael.Rowedder@bmw.de
; * ICOM,Fertig. : ! keine Verwendung !
; * ICOM,Vertrieb: Robert.Schwinn@bmw.de
; WINDOWS-Freig. : WIN NT 4.0       : Ja
;                  WIN XP    32-Bit : Ja
;                  WIN 7     32-Bit : Ja

;.............................................................................
; Interface      = RPLUS
; Beschreibung   : Anbindung eines EDIABAS-Interfaces über TCP/IP (für PROXY-Betrieb)
; Installation   : Anpassung der Einträge in [TCP] auf beiden Seiten (insb.: RemoteHost, Port)
; INI-Datei      : keine
; Ansprechpartner
; * Remote-PC    : ! keine Verwendung !
; * OP(P)S       : ! momentan keine Verwendung !
; * ICOM,Fertig. : Manuel.Rothenberger@bmw.de
; * ICOM,Vertrieb: ! momentan keine Verwendung !
; WINDOWS-Freig. : WIN NT 4.0       : Ja
;                  WIN XP    32-Bit : Ja
;                  WIN 7     32-Bit : Ja

;.............................................................................
; Interface      = RPLUS:name   (z.B.:RPLUS:ICOM_P)
; Beschreibung   : Anbindung des EDIABAS-Interfaces ICOM über TCP/IP
; Installation   : Anpassung der Einträge in [TCP] auf beiden Seiten (ins.: RemoteHost, Port) in den INI-Dateien
; INI-Datei      : RPLUS.INI (Nutzung im Zusammenhang mit dem Interface ICOM)
;                  In RPLUS.INI stehen unter [name] spezif. Einstellungen(z.B.: RemoteHost, Port).
; Ansprechpartner
; * Remote-PC    : ! keine Verwendung !
; * OP(P)S       : ! momentan keine Verwendung !
; * ICOM,Fertig. : Manuel.Rothenberger@bmw.de
; * ICOM,Vertrieb: ! momentan keine Verwendung !
; WINDOWS-Freig. : WIN NT 4.0       : Ja
;                  WIN XP    32-Bit : Ja
;                  WIN 7     32-Bit : Ja

;.............................................................................
; Interface      = ENET
; Beschreibung   : Anbindung über Ethernet
; Installation   : Anpassung der Einträge in [XEthernet] (insb.: RemoteHost)
; INI-Datei      : ENET.INI (insbesondere für Parallelbetrieb notwendig)
; Ansprechpartner: Gerd.Huber@bmw.de => Referenz@bmw.de
; WINDOWS-Freig. : WIN NT 4.0       : Nein
;                  WIN XP    32-Bit : Ja
;                  WIN 7     32-Bit : Ja
;                  WIN 7     64-Bit : Ja

;.............................................................................
; Interface      = PROXY:<Interface>
; z.B. Interface = PROXY:STD:FUNK
; z.B. Interface = PROXY:ENET
;
; Beschreibung   : EDIABAS wird im PROXY-Modus betrieben
; Installation   : hängt vom benutzten Interface ab
; INI-Datei      : hängt vom benutzten Interface ab
; Ansprechparter : Gerd.Huber@bmw.de => Referenz@bmw.de
; WINDOWS-Freig. : WIN NT 4.0       : Nein
;                  WIN XP    32-Bit : Ja
;                  WIN 7     32-Bit : Ja

;*****************************************************************************
; Konfigurationslemente, die existieren,
; aber nicht in EDIABAS.ini geändert werden können

;-----------------------------------------------------------------------------
; BipEcuFile
;       Description :   Dateititel der aktuell geladenen SGBD
;                       (nur gültig während einer Job-Verarbeitung)
;       Value       :   String
;       Default     =   -

;-----------------------------------------------------------------------------
; EdiabasIniPath
;       Description :   Pfad der verwendeten EDIABAS.ini
;       Value       :   String
;       Default     =   -

;-----------------------------------------------------------------------------
; EdiabasVersion
;       Description :   verwendete EDIABAS-Version
;       Value       :   String
;       Default     =   -

;-----------------------------------------------------------------------------
; IfhVersion
;       Description :   verwendete IFH-Version
;       Value       :   String
;       Default     =   -

;-----------------------------------------------------------------------------
; Session
;       Description :   Name der EDIABAS-Session
;       Value       :   String
;       Default     =   -


;=============================================================================
; TCP/IP Configuration
; [TCP]
;=============================================================================

;-----------------------------------------------------------------------------
; RemoteHost
;       Description :   server address/name
;       Default     =   -
; RemoteHost             = 192.168.68.4

;-----------------------------------------------------------------------------
; Port
;       Description :   IP communication port
;       Value       :   1000 < port < 30000
;
;    Spezialfall OP(P)S / ICOM:
;       Value       :   6801  ;OBD-Treiber (CAN)
;       Value       :   6802  ;Most-Treiber
;
;       Default     =   -
; Port                   = 3000
;
; weitere Details siehe Dokumentationen
 
;-----------------------------------------------------------------------------
; TimeoutConnect
;       Description :   Timeout for establishing the connection
;       Value       :   1000 ... 59000
;       Default     =   5000
; TimeoutConnect         = 2000

;-----------------------------------------------------------------------------
; TimeoutReceive
;       Description :   Timeout for receiving a message
;       Value       :   1000 ... 59000
;       Default     =   5000
; TimeoutReceive         = 2000

;-----------------------------------------------------------------------------
; TimeoutFunction
;       Description :   Timeout for a long function
;       Value       :   5000 ... 59000
;       Default     =   59000
; TimeoutFunction        = 10000

;-----------------------------------------------------------------------------
; TimeResponsePending
;       Description :   Time between alive-messages
;       Value       :   500 ... 59000
;       Default     =   2000
; TimeResponsePending = 5000

;-----------------------------------------------------------------------------
; DisconnectOnApiEnd
;       Description :   Enable/Disable Disconnection with function call ApiEnd
;       Value       :   0  = Disconnection disabled
;                       1  = Disconnection enabled
;       Default     =   0
; DisconnectOnApiEnd     = 1

;-----------------------------------------------------------------------------
; InitCmd<n>
;       Description :   Initialization command <n> (normally for OPPS)
;       Default     =   
; InitCmd0               = FE,04,00,03,01
; InitCmd1               = FD,05,00,03,01


;=============================================================================
; XETHERNET Configuration
; [XEthernet]
;=============================================================================

;-----------------------------------------------------------------------------
; RemoteHost
;       Description :   server address/name
;       Value       :   Autodetect
;                       169.254.1.1   ; Beispiel
;                       192.168.100.1 ; Beispiel
;       Default     =
; RemoteHost       = Autodetect

;-----------------------------------------------------------------------------
; IfhRemoteHost
;       Description :   server address/name
;       Value       :   Autodetect
;                       169.254.1.1   ; Beispiel
;                       192.168.100.1 ; Beispiel
;       Default     =
; IfhRemoteHost    = Autodetect

;-----------------------------------------------------------------------------
; HeaderFormat
;       Description :   type of header
;       Value       :   0 ; 6Byte Header (B-Muster)
;                       1 ; 3Byte Header (A-Muster)
;       Default     =   0
; HeaderFormat     = 0

;-----------------------------------------------------------------------------
; TesterAddress
;       Description :   list of permitted tester adresses
;       Value       :   F4     ; F1 durch F4 ersetzen
;                       F5     ; F1 durch F5 ersetzen
;                       F4,F5  ; F1 zuerst durch F4 ersetzen, dann F1 durch F5 ersetzen
;                       F5,F4  ; F1 zuerst durch F5 ersetzen, dann F1 durch F4 ersetzen
;       Default     =   -
; TesterAddress    = F4,F5

;-----------------------------------------------------------------------------
; ControlPort
;       Description :   port of control channel of TCP connection to ZGW
;       Value       :   1000 < port < 59000
;       Default     =   6811
; ControlPort      = 6811

;-----------------------------------------------------------------------------
; DiagnosticPort
;       Description :   port of diagnostic channel of TCP connection to ZGW
;       Value       :   1000 < port < 59000
;       Default     =   6801
; DiagnosticPort   = 6801

;-----------------------------------------------------------------------------
; TimeoutConnect
;       Description :   timeout in ms for connection to ZGW
;       Value       :   1000 ... 59000
;       Default     =   20000
; TimeoutConnect   = 20000


;=============================================================================
; XPROXY Configuration
; [IfhProxy]
;=============================================================================

;-----------------------------------------------------------------------------
; Port
;    Description :    IP base proxy port
;    Value        :    1000 < port < 30000
;    Ports       :    +0 = unknown interface
;            +1 = EDIC
;            +2 = EDICC
;            +3 = ENET
;            +4 = STD
;            +5 = REMOT
;    Default     =    6700
; Port             = 6700


;=============================================================================
; End Of File EDIABAS.ini
;=============================================================================
 

 

Skrevet
  • Forfatter
16 timer siden, ErikTveit skrev:

Her:

Bare vær obs på at rheinhold må ligge sammen med de andre bmw mappene som edibas, ec-apps, NCSEXPER og NFS-backup. Mine ligger alle under C:\. Og Rheingold er da C:\Rheingold

  Reveal hidden contents

;#################
;# EDIABAS 7.3.0 #
;#################

;=============================================================================
[Configuration]
;=============================================================================
Interface        =STD:OBD
Simulation       = 0

EcuPath          =C:\EDIABAS\ECU
SimulationPath   =C:\EDIABAS\SIM
TracePath        =C:\EDIABAS\TRACE
TraceSize        = 1024

ApiTrace         =0
IfhTrace         =0
; IfhnTrace        = 0

; SystemTraceSys   = 0
; SystemTraceBip   = 0
; SystemTraceIfh   = 0
; SystemTraceNet   = 0

; BipDebugLevel    = 0
; BipErrorLevel    = 0

UbattHandling    = 0
IgnitionHandling = 0
ClampHandling    = 0

RetryComm        = 1
SystemResults    = 1
TaskPriority     = 0

; CodeMapping      = C:\EC-Apps\EDIABAS\BIN\ansi2oem.tab
; LoadWin32        = 0

NetworkProtocol  = TCP

; --- neu ab EDIABAS 7.2.0 ---------------------------------------------------
ShowIcon         = 1
LogLevel         = 0
TraceBuffering   = 0
TraceHistory     = 0
TraceSync        = 1
SystemTraceSys=0
SystemTraceBip=0
SystemTraceIfh=0
SystemTraceNet=0
BipDebugLevel=0
BipErrorLevel=0
; TraceWriter      = <FilePathName>

;=============================================================================
[TCP]
;=============================================================================
RemoteHost             = 192.168.68.4
Port                   = 6801
TimeoutConnect         = 2000
TimeoutReceive         = 2000
TimeoutFunction        = 10000
; TimeResponsePending    = 5000
; DisconnectOnApiEnd     = 1
; InitCmd0               = FE,04,00,03,01
; InitCmd1               = FD,05,00,03,01

;=============================================================================
[XEthernet]
;=============================================================================
RemoteHost       = Autodetect
HeaderFormat     = 0
TesterAddress    = F4,F5
ControlPort      = 6811
DiagnosticPort   = 6801
TimeoutConnect   = 20000

;=============================================================================
[IfhProxy]
;=============================================================================
Port             = 6700


;#############################################################################
;#############################################################################
;##   ausführliche Variante von EDIABAS.ini  (mit Kurz-Info und Default)    ##
;#############################################################################
;#############################################################################

;=============================================================================
; EDIABAS Basic Configuration
; [Configuration]
;=============================================================================

;### new Configuration elements since EDIABAS 7.2 ############################

;-----------------------------------------------------------------------------
; ShowIcon
;       Description :   Enable/Disable EDIABAS-Icon in System-Tray
;       Value       :   0  = EDIABAS-Icon disabled
;                       1  = EDIABAS-Icon enabled
;       Default     =   1
; ShowIcon         = 1

;-----------------------------------------------------------------------------
; LogLevel
;       Description :   Logging of fatal faults in EDIABAS.log
;       Value       :   0  = Logging disabled
;                       1  = Logging enabled
;       Default     =   0
; LogLevel         = 0

;-----------------------------------------------------------------------------
; TraceBuffering
;       Description :   Manner of Opening/Closing of Trace-Files
;       Value       :   0  = Opening/Closing after every dump
;                       1  = Trace-Files stay open
;       Default     =   0
; TraceBuffering   = 0

;-----------------------------------------------------------------------------
; TraceHistory
;       Description :   Number of History-Trace-Files
;       Value       :   0 .. 999
;       Default     =   0
; TraceHistory     = 0

;-----------------------------------------------------------------------------
; TraceSync
;       Description :   Synchronisation of Trace files
;       Value       :   0  = Synchronisation disabled
;                       1  = Synchronisation enabled
;       Default     =   1
; TraceSync        = 1

;-----------------------------------------------------------------------------
; TraceWriter
;       Description :   FilePathName of a private TraceWriter
;       Default     =   .  (Default-TraceWriter "TWFile32.dll")
; TraceWriter      = .


;### older Configuration elements till EDIABAS 7.1 ###########################

;-----------------------------------------------------------------------------
; Simulation
;       Description :   Enable/Disable ECU simulation
;       Value       :   0  = Simulation disabled
;                       1  = Simulation enabled
;       Default     =   0
; Simulation       = 0

;-----------------------------------------------------------------------------
; EcuPath
;       Description :   ECU file path
;       Default     =   .
; EcuPath          = C:\EC-Apps\EDIABAS\ECU

;-----------------------------------------------------------------------------
; SimulationPath
;       Description :   Simulation file path
;       Default     =   .
; SimulationPath   = C:\EC-Apps\EDIABAS\SIM

;-----------------------------------------------------------------------------
; TracePath
;       Description :   Trace file path
;       Default     =   .
; TracePath        = C:\EC-Apps\EDIABAS\TRACE

;-----------------------------------------------------------------------------
; TraceSize
;       Description :   Maximum size of each trace file [KB]
;       Value       :   0 .. 32767
;       Default     =   1024
; TraceSize        = 1024

;-----------------------------------------------------------------------------
; ApiTrace
;       Description :   Enable/Disable API/User trace
;       Value       :   0  = Trace disabled
;                       1  = User trace
;                       2  = User trace + time stamp
;                       3  = User trace + time stamp + process id (Win32)
;                       4  = Function trace
;                       5  = Function trace + time stamp
;                       6  = Function trace + time stamp + timing
;                       7  = Function trace + time stamp + timing + process id (Win32)
;                       8  = Debug trace
;       Default     =   0
; ApiTrace         = 0

;-----------------------------------------------------------------------------
; IfhTrace
;       Description :   Enable/Disable IFH trace
;       Value       :   0  = Trace disabled
;                       1  = User trace
;                       2  = User trace + interface
;                       3  = User trace + interface + time stamp
;       Default     =   0
; IfhTrace         = 0

;-----------------------------------------------------------------------------
; IfhnTrace
;       Description :   Enable/Disable IFH network trace (with XREMOTE)
;       Value       :   0  = Trace disabled
;                       1  = User trace
;                       2  = User trace + interface
;                       3  = User trace + interface + time stamp
;       Default     =   0
; IfhnTrace        = 0

;-----------------------------------------------------------------------------
; SystemTraceSys
;       Description :   Enable/Disable system trace (runtime system)
;       Value       :   0  = Trace disabled
;                       Trace levels 1 .. 7
;       Default     =   0
; SystemTraceSys   = 0

;-----------------------------------------------------------------------------
; SystemTraceBip
;       Description :   Enable/Disable BIP trace (runtime system)
;       Value       :   0  = Trace disabled
;                       Trace levels 1 .. 7
;       Default     =   0
; SystemTraceBip   = 0

;-----------------------------------------------------------------------------
; SystemTraceIfh
;       Description :   Enable/Disable IFH system trace
;       Value       :   0  = Trace disabled
;                       Trace levels 1 .. 7
;       Default     =   0
; SystemTraceIfh   = 0

;-----------------------------------------------------------------------------
; SystemTraceNet
;       Description :   Enable/Disable network trace
;       Value       :   0  = Trace disabled
;                       Trace levels 1 .. 7
;       Default     =   0
; SystemTraceNet   = 0

;-----------------------------------------------------------------------------
; BipDebugLevel
;       Description :   BIP debug level of ECU files
;       Value       :   0 .. 32767
;       Default     =   0
; BipDebugLevel    = 0

;-----------------------------------------------------------------------------
; BipErrorLevel
;       Description :   BIP error level of ECU files
;       Value       :   0 .. 32767
;       Default     =   0
; BipErrorLevel    = 0

;-----------------------------------------------------------------------------
; UbattHandling
;       Description :   Ubatt ON/OFF handling
;       Value       :   0  = Ubatt ON/OFF: No EDIABAS error
;                       1  = Ubatt ON/OFF: EDIABAS error
;       Default     =   1
; UbattHandling    = 0

;-----------------------------------------------------------------------------
; IgnitionHandling
;       Description :   Ignition ON/OFF handling
;       Value       :   0  = Ignition ON/OFF: No EDIABAS error
;                       1  = Ignition ON/OFF: EDIABAS error
;       Default     =   1
; IgnitionHandling = 0

;-----------------------------------------------------------------------------
; ClampHandling
;       Description :   automatic check of clamps for Ubatt and Ignition
;       Value       :   0  = no automatic clamp check with send_and_receive
;                       1  = automatic clamp check with send_and_receive
;       Default     =   1
; ClampHandling    = 1

;-----------------------------------------------------------------------------
; RetryComm
;       Description :   Repeat failed communication automatically (1x)
;       Value       :   0  = Retry disabled
;                       1  = Retry enabled (1x)
;       Default     =   1
; RetryComm        = 1

;-----------------------------------------------------------------------------
; SystemResults
;       Description :   Enable/Disable system results (ubatt/ignition/jobstatus)
;       Value       :   0  = Disable system results
;                       1  = Enable system results
;       Default     =   1
; SystemResults    = 1

;-----------------------------------------------------------------------------
; TaskPriority
;       Description :   EDIABAS process/thread priority (only Win32/16)
;       Value       :   0  = Optimal EDIABAS performance = 8
;                       1  = Minimal EDIABAS performance
;                       ..
;                       10 = Maximal EDIABAS performance
;       Default     =   0
; TaskPriority     = 0

;-----------------------------------------------------------------------------
; CodeMapping
;       Description :   Character mapping file path
;       Default     =   .
; CodeMapping      = C:\EC-Apps\EDIABAS\BIN\ansi2oem.tab

;-----------------------------------------------------------------------------
; LoadWin32
;       Description :   Map EDIABAS Win16 calls to EDIABAS Win32
;       Value       :   0  = Win16/32 Mapping disabled (Win16-->Win16)
;                       1  = Win16/32 Mapping enabled (Win16-->Win32)
;       Default     =   0 for Windows 9x/Me
;       Default     =   1 for Windows NT4/2000/XP
; LoadWin32        = 0

;-----------------------------------------------------------------------------
; NetworkProtocol
;       Description :   Network protocol
;       Default     =
; NetworkProtocol  = TCP

;*****************************************************************************
; Interface
;       Description : Connected diagnosis interface
;       Default     = EDIC
; Interface        = STD:FUNK

; Additional information (in German) :
; Bitte beachten: Der HW-Treiber fuer das Interface muss installiert sein!

;.............................................................................
; Interface      = STD:FUNK
; Beschreibung   : Funk-Diagnose Interface MDA von Fa. Siemens
; Installation   : keine
; INI-Datei      : FUNK.INI
; Ansprechpartner: Manuel.Rothenberger@bmw.de
; WINDOWS-Freig. : WIN NT 4.0       : Ja
;                  WIN XP    32-Bit : Ja
;                  WIN 7     32-Bit : Ja

;.............................................................................
; Interface      = STD:OMITEC
; Beschreibung   : Nachfolger von OBD / enthält CAN-Anbindung / Anschluss an OBD-Dose
; Installation   : \EDIABAS\HARDWARE\OMITEC\AnleitungfuerOMITECInstallation.pdf
; INI-Datei      : siehe \EDIABAS\HARDWARE\OMITEC\Omitec_Doku.pdf
; Ansprechpartner: Reinhold.Drexel@bmw.de
; WINDOWS-Freig. : siehe \EDIABAS\HARDWARE\OMITEC\Omitec_Doku.pdf

;.............................................................................
; Interface      = STD:OBD
; Beschreibung   : Serieller Pegelwandler (Nachfolger von ADS / Anschluss an OBD-Dose)
; Installation   : \EDIABAS\HARDWARE\OBD\ODBSETUP (nur noetig fuer WIN NT4, WIN 2000, WIN XP)
; INI-Datei      : siehe \EDIABAS\HARDWARE\OBD\OBD_DOKU.pdf
; Ansprechpartner: Reinhold.Drexel@bmw.de
; WINDOWS-Freig. : WIN NT 4.0       : Ja
;                  WIN XP    32-Bit : Ja
;                  WIN 7     32-Bit : Ja

;.............................................................................
; Interface      = EDIC
; Beschreibung   : Anbindung über K-Line
; HW-Derivate    : PC-Card, PCMCIA , W-LAN (Interface von Fa. Softing)
; Installation   : \EDIABAS\HARDWARE\EDIC\SETUP.EXE
; INI-Datei      : EDICFW.INI, EDICHW.INI
; Ansprechpartner
; * EDIC-PC      : Gerd.Huber@bmw.de
; * PCMCIA       : Gerd.Huber@bmw.de
; * EDIC-NET     : (Richard.Kolbeck@bmw.de)
; WINDOWS-Freig. : WIN NT 4.0       : Ja
;                  WIN XP    32-Bit : Ja
;                  WIN 7     32-Bit : Ja

;.............................................................................
; Interface      = EDICC
; Beschreibung   : Anbindung über K-Line
; HW-Derivate    : PC-Card, PCMCIA , W-LAN (Interface von Fa. Softing)
; Installation   : \EDIABAS\HARDWARE\EDIC\SETUP.EXE
; INI-Datei      : EDICFW.INI, EDICHW.INI, XEDICC.INI
; Ansprechpartner
; * EDIC-PC      : Gerd.Huber@bmw.de
; * PCMCIA       : Gerd.Huber@bmw.de
; * EDIC-NET     : (Richard.Kolbeck@bmw.de)
; WINDOWS-Freig. : WIN NT 4.0       : Ja
;                  WIN XP    32-Bit : Ja
;                  WIN 7     32-Bit : Ja

;.............................................................................
; Interface      = STD:CAN
; Beschreibung   : PCMCIA CAN-Interface CanCardX von Fa. Vector
; Installation   : keine (ausser Installation der CAN-Karte)
; INI-Datei      : CAN32.INI
; Ansprechpartner: FLASH.SERVICE@BMW.DE (Hotline)
; WINDOWS-Freig. : !nicht mehr im Paket enthalten!

;.............................................................................
; Interface      = REMOTE
; Beschreibung   : Anbindung eines EDIABAS-Interfaces über TCP/IP (für Normalbetrieb)
; Installation   : Anpassung der Einträge in [TCP] auf beiden Seiten (ins.: RemoteHost, Port)
; INI-Datei      : keine
; Ansprechpartner
; * Remote-PC    : Gerd.Huber@bmw.de => Referenz@bmw.de
; * OP(P)S       : Michael.Rowedder@bmw.de
; * ICOM,Fertig. : ! keine Verwendung !
; * ICOM,Vertrieb: Robert.Schwinn@bmw.de
; WINDOWS-Freig. : WIN NT 4.0       : Ja
;                  WIN XP    32-Bit : Ja
;                  WIN 7     32-Bit : Ja

;.............................................................................
; Interface      = REMOTE:name
; Beschreibung   : Anbindung eines EDIABAS-Interfaces über TCP/IP (für Parallelbetrieb)
; Installation   : Anpassung der Einträge in [TCP] auf beiden Seiten (ins.: RemoteHost, Port)
; INI-Datei      : REMOTE.INI (insbesondere für Parallelbetrieb notwendig)
;                  In REMOTE.INI stehen unter [name] spezif. Einstellungen(z.B.: RemoteHost, Port).
; Ansprechpartner
; * Remote-PC    : ! momentan keine Verwendung !
; * OP(P)S       : Michael.Rowedder@bmw.de
; * ICOM,Fertig. : ! keine Verwendung !
; * ICOM,Vertrieb: Robert.Schwinn@bmw.de
; WINDOWS-Freig. : WIN NT 4.0       : Ja
;                  WIN XP    32-Bit : Ja
;                  WIN 7     32-Bit : Ja

;.............................................................................
; Interface      = RPLUS
; Beschreibung   : Anbindung eines EDIABAS-Interfaces über TCP/IP (für PROXY-Betrieb)
; Installation   : Anpassung der Einträge in [TCP] auf beiden Seiten (insb.: RemoteHost, Port)
; INI-Datei      : keine
; Ansprechpartner
; * Remote-PC    : ! keine Verwendung !
; * OP(P)S       : ! momentan keine Verwendung !
; * ICOM,Fertig. : Manuel.Rothenberger@bmw.de
; * ICOM,Vertrieb: ! momentan keine Verwendung !
; WINDOWS-Freig. : WIN NT 4.0       : Ja
;                  WIN XP    32-Bit : Ja
;                  WIN 7     32-Bit : Ja

;.............................................................................
; Interface      = RPLUS:name   (z.B.:RPLUS:ICOM_P)
; Beschreibung   : Anbindung des EDIABAS-Interfaces ICOM über TCP/IP
; Installation   : Anpassung der Einträge in [TCP] auf beiden Seiten (ins.: RemoteHost, Port) in den INI-Dateien
; INI-Datei      : RPLUS.INI (Nutzung im Zusammenhang mit dem Interface ICOM)
;                  In RPLUS.INI stehen unter [name] spezif. Einstellungen(z.B.: RemoteHost, Port).
; Ansprechpartner
; * Remote-PC    : ! keine Verwendung !
; * OP(P)S       : ! momentan keine Verwendung !
; * ICOM,Fertig. : Manuel.Rothenberger@bmw.de
; * ICOM,Vertrieb: ! momentan keine Verwendung !
; WINDOWS-Freig. : WIN NT 4.0       : Ja
;                  WIN XP    32-Bit : Ja
;                  WIN 7     32-Bit : Ja

;.............................................................................
; Interface      = ENET
; Beschreibung   : Anbindung über Ethernet
; Installation   : Anpassung der Einträge in [XEthernet] (insb.: RemoteHost)
; INI-Datei      : ENET.INI (insbesondere für Parallelbetrieb notwendig)
; Ansprechpartner: Gerd.Huber@bmw.de => Referenz@bmw.de
; WINDOWS-Freig. : WIN NT 4.0       : Nein
;                  WIN XP    32-Bit : Ja
;                  WIN 7     32-Bit : Ja
;                  WIN 7     64-Bit : Ja

;.............................................................................
; Interface      = PROXY:<Interface>
; z.B. Interface = PROXY:STD:FUNK
; z.B. Interface = PROXY:ENET
;
; Beschreibung   : EDIABAS wird im PROXY-Modus betrieben
; Installation   : hängt vom benutzten Interface ab
; INI-Datei      : hängt vom benutzten Interface ab
; Ansprechparter : Gerd.Huber@bmw.de => Referenz@bmw.de
; WINDOWS-Freig. : WIN NT 4.0       : Nein
;                  WIN XP    32-Bit : Ja
;                  WIN 7     32-Bit : Ja

;*****************************************************************************
; Konfigurationslemente, die existieren,
; aber nicht in EDIABAS.ini geändert werden können

;-----------------------------------------------------------------------------
; BipEcuFile
;       Description :   Dateititel der aktuell geladenen SGBD
;                       (nur gültig während einer Job-Verarbeitung)
;       Value       :   String
;       Default     =   -

;-----------------------------------------------------------------------------
; EdiabasIniPath
;       Description :   Pfad der verwendeten EDIABAS.ini
;       Value       :   String
;       Default     =   -

;-----------------------------------------------------------------------------
; EdiabasVersion
;       Description :   verwendete EDIABAS-Version
;       Value       :   String
;       Default     =   -

;-----------------------------------------------------------------------------
; IfhVersion
;       Description :   verwendete IFH-Version
;       Value       :   String
;       Default     =   -

;-----------------------------------------------------------------------------
; Session
;       Description :   Name der EDIABAS-Session
;       Value       :   String
;       Default     =   -


;=============================================================================
; TCP/IP Configuration
; [TCP]
;=============================================================================

;-----------------------------------------------------------------------------
; RemoteHost
;       Description :   server address/name
;       Default     =   -
; RemoteHost             = 192.168.68.4

;-----------------------------------------------------------------------------
; Port
;       Description :   IP communication port
;       Value       :   1000 < port < 30000
;
;    Spezialfall OP(P)S / ICOM:
;       Value       :   6801  ;OBD-Treiber (CAN)
;       Value       :   6802  ;Most-Treiber
;
;       Default     =   -
; Port                   = 3000
;
; weitere Details siehe Dokumentationen
 
;-----------------------------------------------------------------------------
; TimeoutConnect
;       Description :   Timeout for establishing the connection
;       Value       :   1000 ... 59000
;       Default     =   5000
; TimeoutConnect         = 2000

;-----------------------------------------------------------------------------
; TimeoutReceive
;       Description :   Timeout for receiving a message
;       Value       :   1000 ... 59000
;       Default     =   5000
; TimeoutReceive         = 2000

;-----------------------------------------------------------------------------
; TimeoutFunction
;       Description :   Timeout for a long function
;       Value       :   5000 ... 59000
;       Default     =   59000
; TimeoutFunction        = 10000

;-----------------------------------------------------------------------------
; TimeResponsePending
;       Description :   Time between alive-messages
;       Value       :   500 ... 59000
;       Default     =   2000
; TimeResponsePending = 5000

;-----------------------------------------------------------------------------
; DisconnectOnApiEnd
;       Description :   Enable/Disable Disconnection with function call ApiEnd
;       Value       :   0  = Disconnection disabled
;                       1  = Disconnection enabled
;       Default     =   0
; DisconnectOnApiEnd     = 1

;-----------------------------------------------------------------------------
; InitCmd<n>
;       Description :   Initialization command <n> (normally for OPPS)
;       Default     =   
; InitCmd0               = FE,04,00,03,01
; InitCmd1               = FD,05,00,03,01


;=============================================================================
; XETHERNET Configuration
; [XEthernet]
;=============================================================================

;-----------------------------------------------------------------------------
; RemoteHost
;       Description :   server address/name
;       Value       :   Autodetect
;                       169.254.1.1   ; Beispiel
;                       192.168.100.1 ; Beispiel
;       Default     =
; RemoteHost       = Autodetect

;-----------------------------------------------------------------------------
; IfhRemoteHost
;       Description :   server address/name
;       Value       :   Autodetect
;                       169.254.1.1   ; Beispiel
;                       192.168.100.1 ; Beispiel
;       Default     =
; IfhRemoteHost    = Autodetect

;-----------------------------------------------------------------------------
; HeaderFormat
;       Description :   type of header
;       Value       :   0 ; 6Byte Header (B-Muster)
;                       1 ; 3Byte Header (A-Muster)
;       Default     =   0
; HeaderFormat     = 0

;-----------------------------------------------------------------------------
; TesterAddress
;       Description :   list of permitted tester adresses
;       Value       :   F4     ; F1 durch F4 ersetzen
;                       F5     ; F1 durch F5 ersetzen
;                       F4,F5  ; F1 zuerst durch F4 ersetzen, dann F1 durch F5 ersetzen
;                       F5,F4  ; F1 zuerst durch F5 ersetzen, dann F1 durch F4 ersetzen
;       Default     =   -
; TesterAddress    = F4,F5

;-----------------------------------------------------------------------------
; ControlPort
;       Description :   port of control channel of TCP connection to ZGW
;       Value       :   1000 < port < 59000
;       Default     =   6811
; ControlPort      = 6811

;-----------------------------------------------------------------------------
; DiagnosticPort
;       Description :   port of diagnostic channel of TCP connection to ZGW
;       Value       :   1000 < port < 59000
;       Default     =   6801
; DiagnosticPort   = 6801

;-----------------------------------------------------------------------------
; TimeoutConnect
;       Description :   timeout in ms for connection to ZGW
;       Value       :   1000 ... 59000
;       Default     =   20000
; TimeoutConnect   = 20000


;=============================================================================
; XPROXY Configuration
; [IfhProxy]
;=============================================================================

;-----------------------------------------------------------------------------
; Port
;    Description :    IP base proxy port
;    Value        :    1000 < port < 30000
;    Ports       :    +0 = unknown interface
;            +1 = EDIC
;            +2 = EDICC
;            +3 = ENET
;            +4 = STD
;            +5 = REMOT
;    Default     =    6700
; Port             = 6700


;=============================================================================
; End Of File EDIABAS.ini
;=============================================================================
 

 

Takk. Nå ble det i orden her. :-)

Opprett en konto eller logg inn for å kommentere

Hvem er aktive 0

  • Ingen innloggede medlemmer aktive

Account

Navigation

Søk

Søk

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.